10-inch / 1-inch Active Loudspeaker

Series: élite

Model: E10P

Integrated 650 Watt Amplifier (Peak - 325 Watts Program)
10-inch Woofer / 1-inch Compression Driver
Max SPL 129dB Peak (123dB Continuous)
Bi-Amplified Power Module
Designed for Front-of-House or Monitor Applications

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The E10P is an advanced, compact two-way active loudspeaker designed for a wide variety of pro-audio applications. Innovative processing is built-in to ensure optimum performance and clarity.

Integrated 650 Watt Amplifier (Peak - 325 Watts Program)
10-inch Woofer / 1-inch Compression Driver
Max SPL 129dB Peak (123dB Continuous)
Bi-Amplified Power Module
Designed for Front-of-House or Monitor Applications
100º x 25º Horn with Peak and Average Horn Protection
Two Band EQ with LF Roll-Off and Live/Playback Mode Switches
Combi-Jack XLR and 1/4-inch Input
Integrated All Metal Speaker Standmount Adaptor
Solid 5/8-inch (15mm) Birch Plywood Construction
Made in Canada

Warranty - Yes
Powered (Active) - Yes
Spec Sheet available - Yes

Depth: 12 in
Height: 18.50 in
Product Weight: 34 lbs
Width: 13 in
Coverage Horizontal: 100
Coverage Vertical: 25
Impedance: 4000 ohm
Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 65 Hz
Minimum Frequency Response (Bandwidth): 0.07 kHz
Maximum SPL (Sound Pressure Level): 129 dB
Warranty (Length/Type): 2 Years
System Type: Powered Loudspeaker
Active or Passive: Active
Program Power: 325 Watts (650 Watts Peak)
Max SPL: 129 dB Peak (123dB Continuous)
Frequency Response (Hz +/- 3db): 65 - 20k Hz
Crossover Frequency: 1500 Hz
Driver configuration: 10 inch / 1-inch
HF Dispersion (°H x °V): 100 x 25
HF protection: Peak and Average Limiting
LF Protection: Excursion, RMS
Cooling Scheme: Convection
Power Cable: Removable IEC
Power Switch: Yes
Power Consumption (typ/max): 120 VA / 200VA
Inputs: 1 Combijack (XLR / 1/4-inch)
Input Impedance (Bal/UnBal): 4k ohm / 2k ohms
Input Sensitivity (Vrms Sine): Line in 1.4 at center, 0.35 at max
Level Controls: Gain
EQ Controls: Bass, Treble
Limiter: Peak and Average limiting on horn and woofer
LED Indicators: Power, Clip
Corners: Metal
FEET: Plastic Glides
Flying Hardware: 5 (2 Top, 2 Bottom, 1 Pullback)
Bar Handles: One Side
Pole Mount Adapter(1 3/8inch-3.5cm): Yes
Port(s): Rear
Grille: Perforated Metal
Covering / Finish: Black Ozite (Carpet)
Optional Covering / Finishes: Black Ultrathane Paint (E10PB)
Dimensions (DWH xbackW): 12 x 13 x 18.5 x 5.5 inch
Weight: 34 / 15.5 Lbs/Kg

E10p.pdf 185 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Suggested Products

25/70/100 volt In Ceiling or Wall 4 inch 2-way Fluted IMPP, 3/4 inch ALU Dome, 70mm

by Vanco International

Community R.35-3896 - Three-way, 8-inch, full-range triaxial loudspeaker (grey, black, white)

by Biamp

High Power 12-Inch Two-Way 90°x40° Installation Loudspeaker

by Biamp