The DB-CIJ3 is the ideal choice in installations requiring the passive mixing of two unbalanced line level audio sources to feed a mono balanced (or unbalanced) audio line.
The DB-CIJ3 is a complete unbalanced line-level audio input module. The front panel features two gold plated phono jacks and a single stereo mini-jack, intended for mono or stereo consumer level sources. An input signal may be connected to either the phono jacks or to the mini-jack. The left and right signal inputs are combined and balanced through audio transformers configured to reject induced hum. A mono line-level output is provided on the rear-panel detachable terminal block for connection to a 10 k? or higher input impedance line-level module or equipment input.
Stereo Inputs to Mono Output
Stereo Inputs on RCA Jacks and Stereo Mini-Jack
Unbalanced to Balanced Conversion Without Gain
Transformer Isolation for Unbalanced Line Inputs
Hum Cancellation on Unbalanced Line Inputs
Line-Level Output to Feed 10 k? Equipment Inputs
Output Connections on Detachable Terminal Block
Mix Stereo Inputs to Mono Balanced
Available in RDL White/Gray (D-CIJ3)
Available in Stainless Steel (DS-CIJ3)
Spec Sheet available - Yes
Input connectors (3)::
Phono jacks with gold contacts (Left and Right), Mini-jack 3.5 mm (Stereo)
Frequency response (line level)::
50 Hz to 20 kHz (±1 dB); 30 Hz to 20 kHz (±2 dB)
THD::
<0.2% (1 kHz)
Output Connector::
Detachable terminal block
Dimensions::
Height: 4.13 in. 10.49 cm
Width: 1.7 in. 4.32 cm
Depth: 2.15 in. 5.47 cm
Mounting Box Minimum Dimensions::
Width: 1.80 in. 4.57 cm
Depth: 1.75 in. 4.45 cm