Audio Production Equipment : Amplifiers (Audio) : Parasound Products inc - Parasound ZoneMaster 2350

2-channel Universal Amplifier with Sub Crossover

Model: Parasound ZoneMaster 2350

2-ohm Stable for driving multiple speaker pairs
Two pairs of speaker outputs with A/B buttons
Lockout switch on rear panel to disable A/B buttons
High pass filter, switchable for 30Hz or 80Hz
Automatic on/off by 12V trigger with looping output

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The ZoneMaster 2350 two-channel amplifier is designed from the ground up to be as CI-friendly as it is powerful. With 600W x2 available, it will drive any speaker or passive subwoofer with ease. Unique preamp outputs for full range mono and low pass mono provides unsurpassed flexibility. A switch engages an analog 30Hz or 80Hz high pass filter to prevent heavy bass from reaching smaller speakers. A built-in analog 80Hz, 24d8/octave low-pass filter makes the ZoneMaster 2350 an outstanding amplifier for driving multiple in-wail passive subwoofers without the need for external crossovers.

2-ohm Stable for driving multiple speaker pairs
Two pairs of speaker outputs with A/B buttons
Lockout switch on rear panel to disable A/B buttons
High pass filter, switchable for 30Hz or 80Hz
Automatic on/off by 12V trigger with looping output
Automatic on/off by audio signal
Speaker level input enables integration with systems lacking preamp output jacks
Parasound designed class AB input stage with premium Class D power stage
Subwoofer mode for driving multiple in-wall subs without the need for an external crossover
Mono mode combines L and R for single speaker applications
Mono full range preamp output
Subwoofer 80Hz, 24dB/oct low pass preamp output
Looping left and right output jacks
Left and right input level controls
Efficient, low heat design
Short circuit and overload protection
0.5W Standby power consumption meets EU and Energy Star requirements

Amplifier Type - Power Amplifier
Spec Sheet available - Yes

AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 110 Volts
Total Harmonic Distortion + Noise (THD+N): 0.90 %
Number of Channels: 2
Signal to Noise Ratio: 114 dB
Maximum Frequency Response (Bandwidth): 70 kHz
Maximum Frequency Response (Bandwidth): 70000 Hz
Minimum Frequency Response (Bandwidth): 0.01 kHz
Minimum Frequency Response (Bandwidth): 10 Hz
Product Weight: 15 lbs
Shipping Weight: 22.25 lbs
Width: 17.25 in
Height: 3.50 in
Depth: 14.50 in

Amplifier 5620737 kb - Data Sheet

Project List

Find a Dealer

Suggested Products

8-Channel Power Amplifier, 75W/Ch., 4/8 Ohm or 70V, North America and Japan, 100-120V

by Crestron Electronics, Inc.

6x6 Audio Distribution Amplifier

by Vanco International

Single Channel 40W 70/100V Amplifier with Mic Input

by Vanco International