4K 18Gbps HDMI HDBaseT Splitter/Extender via CAT6/6a/7: 4-Port

Model: VOPEX-C64K18GB-4HDBT

Transmits an uncompressed HDMI signal over one CAT6/6a/7 cable to multiple display locations.
Extend Ultra-HD 4Kx2K 60Hz 4:4:4 to 394 feet (120 meters).
Extend 1080p and 1920x1200 to 443 feet (135 meters).
Zero latency.
Supports Ultra-HD 4Kx2K resolutions (4096x2160 and 3840x2160 @30/60Hz YUV 4:4:4), HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA).

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The VOPEX® 4K 18 Gbps HDMI HDBaseT Splitter/Extender simultaneously distributes uncompressed Ultra-HD 4Kx2K 60Hz 4:4:4 HDMI video, multi-channel audio, RS232, and IR from one video source to up to four displays and speakers, each located up to 394 feet away via CAT6/6a/7 cable using HDBaseT technology.

The VOPEX-C64K18GB-4HDBT system consists of a 4K HDMI HDBaseT broadcast unit, which connects to the HDMI source and also supplies video to a local display via the HDMI loop output; and four included receivers for each remote 4K HDMI display and speakers. The units are interconnected by CAT6/6a/7 cable.

Transmits an uncompressed HDMI signal over one CAT6/6a/7 cable to multiple display locations.
Extend Ultra-HD 4Kx2K 60Hz 4:4:4 to 394 feet (120 meters).
Extend 1080p and 1920x1200 to 443 feet (135 meters).
Zero latency.
Supports Ultra-HD 4Kx2K resolutions (4096x2160 and 3840x2160 @30/60Hz YUV 4:4:4), HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA).
HDMI features supported:
HDMI 2.0 compliant.
Up to 36-bit Deep Color
LPCM, Dolby Digital, Dolby TrueHD, DTS-HD, and DTS2
RGB, YCbCr 4:4:4, YCbCr 4:2:2, and YCbCr 4:2:0
Bandwidth up to 18 Gbps
3D
HDR10
HDCP 2.2/1.4 compliant.
Supports the DDC2B protocol.
Includes four receivers.
The receivers do not require a power supply.
Full Infrared Remote (IR) control of HDMI source or display. IR transport channel can be forward or backward per the installation.
RS232 for configuration and control, pass-through, and firmware updates.
Supports RS232 pass-through from transmitter to receiver or from receiver to transmitter.
Baud rate: 115200 bps
Built-in EDID table.
Cascade units together to send video simultaneously to many receivers.
Mounting brackets included for easy surface/wall mounting.
Ideal for digital signage, tradeshows, or classrooms where high quality video on multiple displays is needed.
Includes:
One 4-port HDBaseT splitter
Four HDBaseT receivers
Five IR emitters
Five IR receivers
Five 3-pin Phoenix connectors for RS232
One 5-pin Phoenix connector for audio
One power supply

Extender Type - HDMI
HDBaseT - Yes
ROHS Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Transmission Range: 394 ft
Certifications: CE, FCC
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Current Draw: 2.70 Amps
DC Voltage: 24 Volts
Depth: 5.40 in
Height: 1.62 in
Width: 8.69 in
Warranty (Length/Type): 2 Years
Active Power: 30 Watt

Splitter/Extender 141835 kb - Data Sheet

Project List

Find a Dealer