4-Channel High-power Switch Mode Class AB Amplifier, 900W (4ohm)

Series: E

Model: E4-75

Four channels delivering 850W peaks into 8 ohms and 900W peaks into 4 ohms. (Pink noise or music, four channels driven)
Digital power supply with large power reservoir giving extremely high peak power
Automatic impedance sensing, changes the power for either a 4 or 8 ohm load
Digital power supply with large power reservoir giving extremely high peak power without any bass 'sag'.MC2 proprietary current driven output stages for ultra high-definition sound
Full high frequency power - the E-Series amplifiers will deliver their power over the entire audio bandwidth

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The E Series is a range of lightweight, high-power switch mode amplifiers designed to the highest standards of reliability and sound quality. The switch mode power supply is capable of delivering high peaks without any perceptible bass 'sag' at very low distortion and is kept within its safe operating area by the new, sophisticated MC² Audio 'intelligent' limiter. All MC² Audio products are covered by a 5 year warranty.

Four channels delivering 850W peaks into 8 ohms and 900W peaks into 4 ohms. (Pink noise or music, four channels driven)
Digital power supply with large power reservoir giving extremely high peak power
Automatic impedance sensing, changes the power for either a 4 or 8 ohm load
Digital power supply with large power reservoir giving extremely high peak power without any bass 'sag'.MC2 proprietary current driven output stages for ultra high-definition sound
Full high frequency power - the E-Series amplifiers will deliver their power over the entire audio bandwidth
Lightweight aluminium construction
Low distortion limiters for speaker protection
Sophisticated power control system linked to both the limiter and the power supply, keeping the amplifier within its operating limits at all times
Optional cross-over cards available. 24dB/Octave Linkwitz Riley
Soft start "power-on" with full in-rush protection. Full DC, short circuit and thermal protection
Front panel display incorporates five-segment LED metering for each output, load indicator signalling either an 8 or 4 ohm load and Auto protect indicator
Weighs around 10.25kg
5-year warranty

Amplifier Signal Type - Audio
Amplifier Type - Power Amplifier
Warranty - Yes
Spec Sheet available - Yes

Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Impedance: 20000 ohm
Number of Channels: 4
Rack Units (Height): 2
Signal to Noise Ratio: 105 dB
Depth: 16.80 in
Height: 3.50 in
Width: 18.90 in
Product Weight: 23.37 lbs
Shipping Weight: 27.78 lbs
Number of Watts Per Channel: 775 W (8 ohm), 900 W (4 ohm)
Sensitivity: 2.7/1.5/1.4 dBu
Warranty (Length/Type): 5 Years
THD: <0.008% (1kHz), <0.03% (20 Hz to 20 kHz)
Gain: 26/31/32 dB
Active Power: 900 Watt
Peak Power: 1800 Watt

4 Channel High-power Switch Mode Class AB Amplifier, 900 W (4ohm) 1808 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Suggested Products

Single Channel 40W 70/100V Amplifier with Mic Input

by Vanco International

6x6 Audio Distribution Amplifier

by Vanco International

Single Channel 100W 70/100V Amplifier with Mic Input

by Vanco International