2-Channel High-power Switch Mode Class AB Amplifier, 1550W (2ohm)

Series: E

Model: E15

Digital power supply with large power reservoir giving extremely high peak power without any bass 'sag'
MC2 proprietary current driven output stages for ultra high-definition sound
Full high frequency power - the E15 will deliver its power over the entire audio bandwidth
Lightweight aluminium construction
All new, low distortion limiters with adjustable threshold points for extra speaker protection

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The E Series is a range of lightweight, high-power switch mode amplifiers designed to the highest standards of reliability and sound quality. The switch mode power supply is capable of delivering high peaks without any perceptible bass 'sag' at very low distortion and is kept within its safe operating area by the new, sophisticated MC² Audio 'intelligent' limiter. All MC² Audio products are covered by a 5 year warranty.

Digital power supply with large power reservoir giving extremely high peak power without any bass 'sag'
MC2 proprietary current driven output stages for ultra high-definition sound
Full high frequency power - the E15 will deliver its power over the entire audio bandwidth
Lightweight aluminium construction
All new, low distortion limiters with adjustable threshold points for extra speaker protection
Sophisticated power control system linked to both the limiter and the power supply, keeping the amplifier within its operating limits at all times
Power Reduction Circuit (PRC) controls on rear panel, linked to the limiter threshold which allow each channel to be independently set so that different loudspeakers can be connected to each channel with safety
Optional cross-over cards available. 24dB/Octave Linkwitz Riley
Soft start 'power on' with full in-rush protection
Full DC, short circuit and thermal protection, which automatically reconnects when the fault is cleared. Front panel LEDs indicate fault condition
Full 5-year warranty

Amplifier Signal Type - Audio
Amplifier Type - Power Amplifier
Warranty - Yes
Spec Sheet available - Yes

Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Impedance: 20000 ohm
Number of Channels: 2
Depth: 16.80 in
Height: 3.50 in
Width: 18.90 in
Product Weight: 21.61 lbs
Shipping Weight: 25.57 lbs
Number of Watts Per Channel: 450 W (8 ohm), 850 W (4 ohm), 1550 W (2 ohm)
Sensitivity: 11/6/5 dBu
Rack Units (Height): 2
Signal to Noise Ratio: 105 dB
Warranty (Length/Type): 5 Years
THD: <0.008% (1kHz), <0.03% (20 Hz to 20 kHz)
Gain: 26/31/32 dB
Active Power: 1550 Watt
Peak Power: 3100 Watt

2 Channel High-power Switch Mode Class AB Amplifier 1874 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Suggested Products

Vocia® VA-8600 Failover Module (VFOM-1)

by Biamp

Single Channel 100W 70/100V Amplifier with Mic Input

by Vanco International

8-Channel Power Amplifier, 75W/Ch., 4/8 Ohm or 100V, International, 220-240V

by Crestron Electronics, Inc.