Tiltout Wall Rack with Dampers, 3U + 3U, 20"D, Surface-mount

Model: LTCR-3320S

3U top compartment (horizontal hold) is ideal for a 19in. panel. Hinge on door allows swing-open access. Fixed rails pivot down for easier access to cables
3U main compartment (vertical hold) for equipment up to 5.25in. x 15.3in. x 19in. Opens with dampers to control rate of descent. Includes fixed rails and a removable shelf
Both compartments secure with a single lock
Backbox with keyholes on 16in. centers
Knockouts in top, bottom, rear

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The surface-mount wall rack with tilt-out operation shall be Lowell Model LTCR-3320S which shall measure 25.00"W x 34.06"H and project 6.015in. from wall. Construction shall be steel with front/bottom vents and a neutral Network Grey powder epoxy finish. The assembly shall include a backbox and two compartments to mount 19" equipment. The backbox shall feature knockouts in top, bottom and rear. Oil-filled dampers shall control lowering of equipment when opened. A removable shelf shall be included. The main compartment shall mount equipment measuring up to 5.25" (3U) x 15.3" deep and store it in a vertical position. The top compartment shall mount equipment up to 5.25" (3U) x 4.3" deep. The assembly shall have a load capacity of 50 lbs. and include a single gang EO?box in the base.

3U top compartment (horizontal hold) is ideal for a 19in. panel. Hinge on door allows swing-open access. Fixed rails pivot down for easier access to cables
3U main compartment (vertical hold) for equipment up to 5.25in. x 15.3in. x 19in. Opens with dampers to control rate of descent. Includes fixed rails and a removable shelf
Both compartments secure with a single lock
Backbox with keyholes on 16in. centers
Knockouts in top, bottom, rear
Vents at bottom and along integral formed handle
1in. cable raceway on each side
E.O. box in base
Load capacity 50lbs.
Network Grey finish

Rack Type - Wallmount
ROHS Compliant - Yes
Security (Locking) - Yes
Spec Sheet available - Yes

Rack Units (Available): 6
Mounting Type: Surface
Regulatory Compliance: EIA/TIA compliant
Projection from Wall: 6.8 in
Color: Grey
Maximum Load Capacity: 50 lbs
Construction: Steel
Exterior Width: 25 in
Exterior Height: 34.06 in
Exterior Depth/Length: 6.80 in
Certifications: Certified U.S. steel

LTCR-3320R - Tiltout Wall Rack with Dampers, 3U + 3U, 20"D, Recessed

1902-LTCR3320S.pdf 158527 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor