Signal Processing Systems : Extenders & Repeaters : Key Digital Systems - KD-X444S

4K/18G HDBT POH Extender

Model: KD-X444S

HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
4K Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
Flexible Power over HDBaseT: Only one power connection needed. Tx may power Rx, or Rx may power Tx
Low Profile: Super slim chassis design
Signal Extension: For resolution and cable quality

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The KD-X444S is a 4K/18G HDBT POH Extenders (Includes KIT Tx/Rx 4K/40meters 1080P/70meters).

HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
4K Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
Flexible Power over HDBaseT: Only one power connection needed. Tx may power Rx, or Rx may power Tx
Low Profile: Super slim chassis design
Signal Extension: For resolution and cable quality
4K/UHD: 125ft. (40m) maximum »» 1080p: 230 ft. (70m) maximum
HDR10 (High Dynamic Range): More life-like images through a greater range of luminance levels
HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
EDID Control: Internal library with 15 EDID handshakes including 4K with HDR in addition to native EDID data from Output/Display device connected to Rx
Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source and display, EDID Control handshake, and Hot Plug Detection control
IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block
Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units
RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
Unit Control Mode: Provides control of Tx unit as well as connectivity status
Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
CEC Pass-thru: For inter-device control between input and output HDMI channel
Control System Support: Fully controllable by all RS-232 supported control systems via open API: Compass Control® Pro, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc

Extender Type - HDMI
Extender Type - RS232
Warranty - Yes
Spec Sheet available - Yes

Certifications: CE, WEEE, EAC
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 20 Watt
Current Draw: 66 Amps
DC Voltage: 12 Volts
Depth: 4.10 in
Height: 0.88 in
Width: 2.80 in
Product Weight: 0.75 lbs
Color: Black
Warranty (Length/Type): 3 Years

Extenders 366584 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

ARC Digital Audio Extender

by Vanco International

Wirelessly Extends Stereo Analog and Subwoofer Audio Signals Up to 164ft (50m)

by Vanco International

Digital Audio Extender with eARC

by Vanco International