Power over HDBaseT/HDMI via Single CAT5e/6 4K Extender with Audio DeEmbedding, HDR10, HDCP2.2
Model: KD-X422POA
HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
Power Over HDBaseT: Features power extension from Tx to Rx with Power Over HDBaseT, Rx unit does not require power supply
Audio De-Embedding: Audio from the HDMI input is de-embedded through Analog L/R Balanced/Unbalanced and Digital Coaxial Audio (PCM) audio outputs to enable external audio connectivity with audio distribution systems and amplifiers
Signal Extension:
Up to 150ft at 4K 24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling
The KD-X422POA is a power over HDBaseT/HDMI via single CAT5e/6 (Tx + Rx set) extenders with audio de-embedding, HDR10, HDCP2.2, 4K.
HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
Power Over HDBaseT: Features power extension from Tx to Rx with Power Over HDBaseT, Rx unit does not require power supply
Audio De-Embedding: Audio from the HDMI input is de-embedded through Analog L/R Balanced/Unbalanced and Digital Coaxial Audio (PCM) audio outputs to enable external audio connectivity with audio distribution systems and amplifiers
Signal Extension:
Up to 150ft at 4K 24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling
Up to 125ft at 4K 24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6 UTP/STP cabling
Up to 250ft at 1080p/1920x1200 using KD-CAT6STP1X cabling
Up to 230ft at 1080p/1920x1200 using third-party CAT5e/6 cabling
HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
HDR10 (High Dynamic Range): More life-like images through a greater range of luminance levels
4K/Ultra HD Resolution: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit
Deep Color Support: Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit
3D: Support for standard 3D stereoscopic signal formats
HDMI® and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s
EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx
Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices
Full Buffer System™: Manages TMDS re-clocking/signal re-generation, HDCP authentication with source and display, EDID Control handshake, and Hot Plug control
Low Profile: Super slim chassis design
IR Sensor: Sensor powering via +5V on Tx unit’s IR In port collects line-of-sight IR from remote(s) without external IR connecting block
Up/Down IR: Two channels of IR enable control to/from devices connected to Tx and Rx units
RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
Rotary Switch RS-232 Control Mode: Provides control of Tx unit as well as connectivity status
Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
CEC Support: For inter-device control between input and output HDMI channel
I2C Communication: EDID and HDCP authentication to Display and Source
Control System Support: Fully controllable by all RS-232 supported control systems via open API: Compass Control®, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.