Power over HDBaseT/HDMI via Single CAT5e/6 4K Extender with HDR10, HDCP2.2

Model: KD-X222PO

HDBaseT via Single CAT5e/6 UTP/STP Extension - With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
KD-X222PO - Power extension from Tx to Rx with Power Over HDBaseT, Rx unit does not require power supply
Signal Extension:
Up to 150ft at 4K 24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling
Up to 125ft at 4K 24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6UTP/STP cabling

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The KD-X222PO HDBaseT/HDMI (Tx and Rx) extender is an HDCP 2.2 compliant product that extend 4K/UHD 24/25/30 (4:4:4) and 4K/UHD 60 (4:2:0) signals up to 150ft. using Key Digital® KD-CAT6STP1X Super CAT6A shielded cable, or up to 125ft. using a single third-party CAT5e/6 cable. 1080p/60, 1920x1200, 3D signals are extended up to 250ft. via single Key Digital® KD-CAT6STP1X Super CAT6 shielded cable or up to 230ft. using a single third-party CAT5e/6 cable. In addition to HDMI video and audio signals, X222PO carries IR or RS-232 for controlling remotely located equipment or the RS-232 port can be used to control the X222PO.

HDBaseT via Single CAT5e/6 UTP/STP Extension - With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
KD-X222PO - Power extension from Tx to Rx with Power Over HDBaseT, Rx unit does not require power supply
Signal Extension:
Up to 150ft at 4K 24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling
Up to 125ft at 4K 24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6UTP/STP cabling
Up to 250ft at 1080p /1920x1200 using KD-CAT6STP1X cabling
Up to 230ft at 1080p /1920x1200 using third-party CAT5e/6 cabling
HDCP 2.2 - Compliancy up to HDCP 2.2 and backward compliant
HDR10 (High Dynamic Range) - More life-like images through a greater range of luminance levels
4K/Ultra HD Resolution - Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit
Deep Color Support - Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit
3D - Support for standard 3D stereoscopic signal formats
Low Profile - Super slim chassis design
HDMI® and HDCP Licensing - Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s
EDID Control - Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx
Hot Plug Detection Control - Enables integrator to choose if active signal voltage is forced to connected input devices
Full Buffer System™ - Manages TMDS re-clocking/signal re-generation, HDCP authentication with source and display, EDID control handshake, and hot plug control
IR Sensor - Sensor powering via +5V on Rx unit’s IR in port collects line-of-sight IR from remote(s) without external IR connecting block
Up/Down IR - two channels of IR enable control to/from devices connected to Tx and Rx units
RS-232 - Bi-Directional control to/from Tx and Rx unit on Phoenix connector
Rotary Switch RS-232 Control Mode - provides control of Tx unit as well as connectivity status
Lossless compressed digital audio - Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
CEC Support - For inter-device control between input and output HDMI channel
I2C Communication - EDID and HDCP authentication to display and source
Control System Support - fully controllable by all RS-232 supported control systems via open API compass Control®, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc

Extender Type - Audio
Extender Type - HDMI
Extender Type - Other
ROHS Compliant - Yes
HDBaseT - Yes
Spec Sheet available - Yes

Transmission Range: 250 ft
Certifications: CE
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Current Draw: 2 Amps
DC Voltage: 12 Volts
Depth: 2.80 in
Height: 0.88 in
Width: 4.10 in
Product Weight: 0.75 lbs
Color: Black
Regulatory Compliance: WEEE, HDCP

Extender 394695 kb - Data Sheet

Project List

Extender 3086931 kb - Other

Project List

Find a Dealer

Find a Distributor

Suggested Products

ARC Digital Audio Extender

by Vanco International

Digital Audio Extender with eARC

by Vanco International

Wirelessly Extends Stereo Analog and Subwoofer Audio Signals Up to 164ft (50m)

by Vanco International