Signal Processing Systems : Receivers & Transmitters : Hall Technologies - UV1-S-WP

Wallplate Video over UTP Sender

Series: Mini-Cat®

Model: UV1-S-WP

Single gang wallplate construction saves space and simplifies installations
Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for High-Resolution A/V extension
Amplifies the signal for clean and crisp transmission
Differential signaling eliminates ground loops and noise
Sends a VGA or Component Video Signal on Cat5/5e/6 cables to 500 feet

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The UV1-S-WP Mini-Cat transmits Video + Phantom Power over UTP (Cat5/5e/6) cable up to 500 feet to compatible Receiver (UV1-R or UV1-R-WP). It is constructed as a single gang wall plate with a shallow depth so that it can mount into any size Junction Box. The UV1-S-WP Mini-Cat supports PC resolutions up to 1600 x 1200 or HDTV resolutions of 1080p. The unit includes a 9 VDC Universal power supply that supplies power to the Receiver via the UTP cable. Made in the USA.

Single gang wallplate construction saves space and simplifies installations
Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for High-Resolution A/V extension
Amplifies the signal for clean and crisp transmission
Differential signaling eliminates ground loops and noise
Sends a VGA or Component Video Signal on Cat5/5e/6 cables to 500 feet
Standard RJ45 connector on the rear for easy termination
Includes a power supply that connects to the transmitter on screw terminals and can be remotely location using low-voltage wiring.
Transmits power to the remote receiver
Can be powered from the receiver side over the Cat5 cable (if a power supply is attached to the receiver)
Supports a wide range of PC and HDTV resolutions from VGA to UXGA and 480p to 1080p.
LED for power-good indication (blinks if there is insufficient power voltage)

Receiver/Transmitter Cable Type - Other
Receiver/Transmitter Format Type - Component Video
Receiver/Transmitter Format Type - VGA
Supported Resolution - Other
Spec Sheet available - Yes

Resolutions: Up to 1920 x 1440 non-interlaced at 60Hz
Standards: VGA, SVGA, XGA, or UXGA video
Video Types: VGA through UXGA, RGBS, RGsB (sync on green), or YpbPr
Dimensions: Single Gang Wall Plate
Transmission Range: 500 ft
Current Draw: 0.50 Amps
DC Voltage: 9 Volts
Shipping Weight: 2 lbs

UV1-S-DP - Decora Style Video + Power Sender

Mini-Cat_Brochure.pdf 199 kb - Data Sheet

Project List

Find a Dealer

Suggested Products

UCX Matrix Switcher Receiver with HDMI 2.0 inputs and USB 3.1 Gen1 host ports

by Lightware

HDBT Set, HDMI 4K60, USB2.0, Aud, Tx-WP+ Rx-Box

by Covid, Inc.

Transmitter OMNEO

by Bosch Conferencing and Public Address Systems