Signal Processing Systems : Converters : Evertz - 7730DAC-A4

SDI to Component Analog Video Converter with 4-Channel Analog Audio Converter/Embedder

Model: 7730DAC-A4

SDI 525 or 625, 270Mb/s component digital video input
One 270Mb/s re-clocked SDI output
Four output BNCs for YPbPr or RGB and composite sync
One composite analog output on BNC for monitoring and control
One frame video synchronizer (with +S option)

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The 7730DAC line of serial digital video to component analog converters are broadcast quality D to A's with an extensive list of additional features. High quality digital to analog conversion of audio can be packaged with the video to create a D to A frame synchronizer with audio demux. In addition, Evertz fault monitoring processing will analyze and report video and audio problems via an On-Screen-Display, or remotely via VistaLINK® SNMP.

SDI 525 or 625, 270Mb/s component digital video input
One 270Mb/s re-clocked SDI output
Four output BNCs for YPbPr or RGB and composite sync
One composite analog output on BNC for monitoring and control
One frame video synchronizer (with +S option)
Infinitely variable output phase (27MHz clock increments)
Freeze modes: black, freeze, pass
Menu adjustable free running frequency
VU/PPM bargraph level Indicators
Decodes vertical interval time code (VITC), and "burns" the time code into the monitoring output picture
A comprehensive on screen display is available to configure the various features of the module
Flexible configuration of the text and audio bar graph information displays
An extensive list of error conditions can be monitored and fault conditions can be configured from these conditions
On screen messages can be triggered by the configured fault conditions
VistaLINK® capable for remote monitoring and control via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
One group (4 channels) of synchronous 20-bit audio is de-multiplexed from the incoming digital video
2 unbalanced AES audio inputs (up to 48kHz, 24 bits) on BNC
User selects EITHER the de-embedded audio or the input AES audio
The selected audio is delayed equivalently to the video delay with the +S option
4 high quality 24 bit audio channels are output (analog) as balanced on 2 removable barrier strips
Low impedance outputs (66 Ohms)
Analog audio output levels are adjustable
Additional audio delay of up to 5 seconds
Additional audio advance of up to 1 frame, depending on video delay Loss of video modes: pass audio, mute audio

Converter Signal Types - Audio & Video
Converter Type - Digital to Analog Converter
Spec Sheet available - Yes

Serial Video Input - Standard: SMPTE ST 259-C, 270Mb/s, 525/625 component
Serial Video - Number of Inputs: 1
Serial Video Input - Connector: BNC per IEC 61169-8 Annex A
Serial Video Input - Return Loss: > 15dB up to 270MHz
Serial Video Input - Embedded Audio: SMPTE ST 272-A
Serial Video Input - Frequency Lock Range: ±75ppm from nominal
Analog Video Output - Standard: SMPTE/EBU N10, Betacam, MII and NTSC specific standards GBR or YPbPr formats, with or without setup
Analog Audio - Number of Outputs: 4
Analog Audio Outputs - Type: Balanced analog audio
Analog Audio Outputs - Connector: Two 6-pin removable terminal strips
Analog Audio Outputs - Impedance: 66 Ohms balanced
Analog Audio Outputs - Sampling Frequency: 48kHz
Analog Audio Outputs - Signal Level: 0dBFS => 12 to 25dBu (user settable)
Analog Audio Outputs - Frequency Response: < ±0.05dB (20Hz to 20kHz)
Analog Audio Outputs - Dynamic Range: 24 bits when AES inputs selected, 20 bits when embedded audio selected
Analog Audio Outputs - THD+N: < 0.001% (> 100dB) at 1kHz, -1dBFS
Analog Audio Outputs - Crosstalk: < -105dB (20Hz to 20kHz)
Analog Audio Outputs - DC Offset: < ±30mV
Analog Audio Outputs - SNR: > 110dB "A" Weighting
Analog Audio Outputs - Inter-Channel Phase Error: < ±1° (20Hz to 20kHz)
AES Audio Inputs - Standard: SMPTE ST 276, single ended synchronous or asynchronous PCM AES
AES Audio - Number of Inputs: 2
AES Audio Inputs - Connector: BNC per IEC 61169-8 Annex A
AES Audio Inputs - Resolution: 24 bits
AES Audio Inputs - Sampling Rate: 32kHz to 48kHz on inputs, synchronous 48kHz on outputs
AES Audio Inputs - Minimum I/O Delay: 2.1ms
AES Audio Inputs - Maximum I/O Delay: 5s
Number of Slots: 2
Input Signal Types: Audio, Video
Output (Converted) Signal Type: Audio, Video
Active Power: 17.50 Watt
DC Voltage: 12 Volts
Regulatory Compliance: FCC Part 15 Class A, EU EMC Directive

7730DAC - SDI to Component Analog Video Converter

SDI to Component Analog Video Converter 82 kb - Data Sheet

Project List

Find a Dealer