Signal Processing Systems : De-embedders & Embedders : Evertz - 7721AE-A4-HD

HD/SD-SDI Analog Audio Embedder

Model: 7721AE-A4-HD

Automatic detection of video input format
Supports 1.5Gb/s HD per SMPTE ST 292-1, 270Mb/s SD per SMPTE ST 259-C, and SDTi per SMPTE ST 305
Programmable audio delays (up to 5 frames or 84 milliseconds)
Ancillary packet cleaning mode removes all audio before embedding
Individual audio channel assignment for embedded audio group

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 7721AE-A4-HD Analog Audio Embedder performs A/D conversion on 4 balanced pairs of analog audio (as one audio group) and embeds them into a 1.5Gb/s serial HD input video signal or a 270Mb/s serial SD input video signal as specified by SMPTE ST 299-1/ST 272. The companion 7721AD-A4-HD Audio De-embedder facilitates audio de-multiplexing at the destination. The 7721AE-A4-HD occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module. VistaLINK® enables control and configuration capabilities via Simple Network Management Protocol (SNMP). This offers the flexibility to manage the module status monitoring and configuration from SNMP enabled control systems such as Evertz VistaLINK®.

Automatic detection of video input format
Supports 1.5Gb/s HD per SMPTE ST 292-1, 270Mb/s SD per SMPTE ST 259-C, and SDTi per SMPTE ST 305
Programmable audio delays (up to 5 frames or 84 milliseconds)
Ancillary packet cleaning mode removes all audio before embedding
Individual audio channel assignment for embedded audio group
Audio mixer per audio channel to provide voice-over
Upstream embedded Dolby E compatible (passed through)
Monitoring headphone jack for audio input and embedder group channels
Comprehensive signal and card status monitoring via four-character card-edge display and LEDs
VistaLINK® capable for remote monitoring and control via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller

De-embedder/Embedder Type - Analog Audio
Spec Sheet available - Yes

Serial Video Input - Standard: Auto detect; 1.5Gb/s SMPTE ST 292-1 or 270Mb/s SMPTE ST 259-C 525 or 625 line component, SMPTE ST 305 (SDTi)
Serial Video - Number of Inputs: 1
Serial Video Input - Connector: BNC per IEC 61169-8 Annex A
Serial Video Input - Equalization: Automatic to 300m @ 270Mb/s with Belden 1694A or equivalent cable
Serial Video Input - Return Loss: > 15dB up to 270Mb/s
Serial Video Output - Connector: BNC per IEC 61169-8 Annex A
Serial Video Output - Signal Level: 800 mV nominal
Serial Video Output - DC offset: 0V ± 0.5V
Serial Video Output - Rise and Fall Time: 900 ps nominal
Serial Video Output - Overshoot: < 10% of amplitude
Serial Video Output - Return Loss: > 15dB at 270Mb/s
Serial Video Output - Wide Band Jitter: < 0.2UI
Analog Audio - Number of Inputs: 4
Analog Audio Inputs - Type: Balanced analog audio
Analog Audio Inputs - Connector: 12 pin removal terminal block
Analog Audio Inputs - Impedance: High Impedance (> 20Ohms)
Analog Audio Inputs - Frequency Response: ±0.1dB, 20Hz to 20kHz
Analog Audio Inputs - THD: < 0.005 % (20Hz to 20kHz)
Analog Audio Inputs - Channel Phase Difference: ±1 °
Analog Audio Inputs - SNR: > 95dB with input @ 18dBu (nominal) (weighted)
Analog Audio Inputs - Maximum Audio Input Level: +24dBu
Analog Audio Inputs - Signal Quantization: 24 bits
Number of Slots: 1
Active Power: 10 Watt
DC Voltage: 12 Volts
Regulatory Compliance: FCC Part 15 Class A, EU EMC Directive

HD/SD-SDI Analog Audio Embedder 60 kb - Data Sheet

Project List

Find a Dealer