Fiber Optic Systems : Fiber Optic Receivers & Transmitters : Evertz - 7707SVTxx-2

Dual S-Video Fiber Transmitter, CWDM DFB laser, VistaLINK®

Model: 7707SVTxx-2

Single card fiber multiplexor for up to two S-Video signals
Supports both NTSC and PAL
Broadcast quality analog video performance
Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video transport
Superior digital data transmission

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 7707SVTxx-2 is a VistaLINK® capable S-Video fiber transmitter for broadcast quality signals. This single card module accepts two S-Video inputs, performs analog to digital conversion and transmits them over a single fiber. The companion 7707SVR-2 S-Video Fiber Receiver demultiplexes the signals and converts them back to analog form. The fiber output of the 7707SVT-2 is available in an assortment of optical wavelengths accomodating 1310nm/1550nm, CWDM and DWDM transmission schemes. The 7707SVT-2 occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.

Single card fiber multiplexor for up to two S-Video signals
Supports both NTSC and PAL
Broadcast quality analog video performance
Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video transport
Superior digital data transmission
Signal transport over fiber uninterrupted by loss of input video feeds
Comprehensive Signal and card status monitoring via four-digit card-edge display, or remotely through SNMP and VistaLINK® capability
Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
Supports single mode and multi-mode fiber optic cable
Optical output wavelengths at 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available

Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes

Signal to Noise Ratio: 70 dB
Active Power: 0.92 Watt
DC Voltage: 12 Volts
Regulatory Compliance: Class 1 laser product, Complies with 24CFR 1040.10 and 1040.11 IEC 60825-1,Complies with FCC Part 15 Class A, EU EMC Directive
Analog S-Video Input Standards: NTSC, SMPTE ST 170, PAL, ITU-R 624-4
Analog S-Video Number of Inputs: 2
Analog S-Video Input Connector: IEC 933-5 (4-pin mini-DIN)
Analog S-Video Input Signal Quantization: 12 bits
Analog S-Video Input System Bandwidth: 5.5 MHz
Analog S-Video Input Input Level: Y: 1.0V p-p, C: 0.286V p-p
Analog S-Video Input Input Impedance: 75 ohm
Analog S-Video Input Return Loss: > 30 dB to 5.5MHz
Analog S-Video Input Signal/Noise Ratio: > 70 dB
Analog S-Video Input Differential Gain: < 1.0 %
Analog S-Video Input Differential Phase: < 0.7 deg
Analog S-Video Input Passband Ripple NTSC: < ±0.1dB to 4.1MHz, < ±0.2dB to 5.5MHz
Analog S-Video Input Passband Ripple PAL: < ±0.1dB to 4.8MHz, < ±0.2dB to 5.8MHz
Analog S-Video Input Line Time Distortion: 1.2 %
Optical Output: 1
Optical Output Return Loss: > 14 dB
Output Power 1310nm FP (Standard): -7 ±1 dBm
Output Power 1550 & CWDM DFB: 0 ±1 dBm
Output Power DWDM: 7 ±1 dBm
System Performance Video Input to Output Delay: < 10 micro s
Number of Slots: 1

Fiber Transmitter 82 kb - Data Sheet

Project List

Find a Dealer