The 5600MSC and 5601MSC Master Sync and Clock Generators are both a broadcast quality master sync pulse generator (SPG) and a master clock. Each provides all of the synchronizing signals needed in a 21st century TV station or post production facility at the same time as solving the problem of locking the in-house master clock system to the master video sync pulse generator.On the 5600MSC, the master clock section provides a primary longitudinal time code (LTC) output on an XLR connector and a 9-pin D connector, as well as a secondary LTC output available only on the 9-pin D connector. The time code may be set from the front panel or referenced to a number of different sources.On the 5601MSC, the master clock section provides two longitudinal time code (LTC) or optional IRIG outputs on XLR connectors and a 15-pin D connector. The time code may be set from the front panel or referenced to a number of different sources.
LTC Input (optional on 5600MSC, standard on 5601MSC)
Reference loop input for video and 10MHz/5MHz references
GPS option for frequency and time reference
3.58/4.43/5MHz frequency reference output (only on 5601MSC)
10MHz frequency reference output
Wordclock output (optional on 5600MSC, standard on 5601MSC)
Output frequency stability guaranteed better then 1.0 x 10-8 (or 0.01ppm)
Optional modem for time reference dial up
2 GPS based units will be in time and phase even when remotely separated by miles
Optional test generators available are (refer to ordering options): Composite Video, AES/DARS, Analog Audio Tones, SD SDI, HD SDI & 3Gb/s (only on 5601MSC)
Optional Network Time Protocol (NTP) server support (GPS option should be ordered with NTP option)
For 5600MSC, 16 character Alpha-numeric display, with 20 pushbuttons
For 5601MSC, dual 6 line x 16 character Alpha-numeric display, with 10 pushbuttons
Rack mountable
Optional redundant power supply (redundant power hot-swappable only on 5601MSC)
Automatic changeover units available for dual redundant systems applications
Compatible with Dual GPS Data Fiber Receivers & Transmitters
2 factory presets and 3 user presets available
VITC reader on reference input for time reference
Ten Field Pulse is available on NTSC sync outputs
VistaLINK® control for device configuration and status monitoring
On 5601MSC, all active components are front panel extractable & serviceable
Spec Sheet available - Yes
Operating Temperature (Maximum):
158 F
Operating Temperature (Minimum):
-40 F
AC Voltage:
240 Volts
AC Voltage (Maximum):
240 Volts
AC Voltage (Minimum):
100 Volts
Active Power:
90 Watt
Depth:
11.50 in
Height:
1.77 in
Width:
19.02 in
Product Weight:
8 lbs
Color:
Black
Black Burst:
SMPTE ST 170 (NTSC-M), ITU-R BT.1700-1 (PAL-B)
Bi-Level:
Slo-Pal 625i/48, 625i/47.95
HD Tri-Level:
SMPTE ST 274 (1080p/23.98, 1080p/24, 1080i/50, 1080i/59.94, 1080i/60, 1080p/23.98sF, 1080p/24sF, 1080p/25, 1080p/29.97, 1080p/30)SMPTE ST 296 (720p/59.94, 720p/60, 720p/50, 720p/24)
Pulse Signals:
PAL color frame, 1Hz pulse, 1/1.001Hz pulse, 6/1.001Hz pulse