Input: One GigE IP input (H.264, MPEG-2, or VC-1) – UDP, RTP, RTSP, HTTP, HTTP Live, FTP, RTMP (Open Flash), WMV9 with HTTP/ASF
Outputs: Multiple delayed simultaneous IP streams (MPEG-2 or H.264) – HTTP Live (HLS), UDP, RTP, RTSP, HTTP multicast and unicast with transport stream envelope, HTTP Smooth, FTP, RTMP (Open Flash), or WMV9 with HTTP/ASF
Input or output format can be MPEG-2 or H.264
Capable of pulling the source streams over IP (UDP, RTP, RTSP, RTMP, adaptive, or HTTP)
Supports M3u8 playlist files (standalone and through HTTP live)
The DelayServer IP™ is a delaying file server that restreams 40+ MPEG-2 or H.264 IP transport streams and plays them back after a delay that is finely adjustable from seconds to hours. Capture and playback can be simultaneous on multiple streams. Interestingly the delay time can be adjusted “on the fly” by the user.Delay capability is primarily set by storage capacity. We employ solid state drives as primary storage.Embedded Linux® Based, Telco Tested, 1 RU, Stand Alone Multiple IP to IP Time Delay System for Multiple Video Streams in Both Standard and High Definition MPEG-2 or H.264 Streams. Standard Unit Ships with a .25 Tera Byte Intel® High End SSD. Can Time Delay Up to 40+ Separate IP Streams for 8 Hours. Larger SSD's Available. Managed by Remote GUI with Easy To Use Graphical Interface with Pull Downs and Recallable Config Files. Throughput: 300-400
Mbps,Depends on Gig/E Throughput of NIC on Motherboard.
Input: One GigE IP input (H.264, MPEG-2, or VC-1) – UDP, RTP, RTSP, HTTP, HTTP Live, FTP, RTMP (Open Flash), WMV9 with HTTP/ASF
Outputs: Multiple delayed simultaneous IP streams (MPEG-2 or H.264) – HTTP Live (HLS), UDP, RTP, RTSP, HTTP multicast and unicast with transport stream envelope, HTTP Smooth, FTP, RTMP (Open Flash), or WMV9 with HTTP/ASF
Input or output format can be MPEG-2 or H.264
Capable of pulling the source streams over IP (UDP, RTP, RTSP, RTMP, adaptive, or HTTP)
Supports M3u8 playlist files (standalone and through HTTP live)
Supports up to 1.5 TB of storage for time delay – over 30 days of programming, depending on stream resolutions
Can store and forward (perform time delay) on 40 independent IP streams at the same time
Supports multiple outputs at different time delays per single input
Accurate to the second on multi-hour delays
Simultaneously reads and writes with “on the fly” adjustment of delay time
Built-in SSL VPN client for secure transport of streams across the internet or for traversing complicated networks. The tunnel is based on OpenVPN and it works for both multicast and unicast traffic.
Resolutions: qHD, H.264up, SQVGA, QCIF, QVGA, CIF, or any custom size up to 1080p
Supports SD or HD input
Up to 1080p HD output
Tested compatible with major brands of IP devices including Amino™, Roku®, Atlanta DTH, and Apple iPad® and iPhone®
Audio support: AAC, Embedded pass-through, Ogg Vorbis, MPEG-1 Layer II, optional MP3, and/or optional “SurCode for Dolby Digital” AC-3
Settings are remembered when power cycled
Based on embedded Linux®
SNMP or REST or SOAP remote management
Low power consumption due to Ivy Bridge Intel® CPU
Ships with one HLS streaming enabled – for instant QA of functionality
Time calibration via NTP
2 types of delay: IP delay via hard drive in 1 second steps with 10 second minimum, or IP Delay via output buffering in 1 ms steps up to 10 seconds
Applications:
Accurate Transport Stream time delay for webcasting across multiple time zones
Over 30 days of Back Up and playback of all channels for Network Operations (N.B. at low rates and disk dependent)