Signal Processing Systems : Receivers & Transmitters : DekTec - DTM-3237

OEM DVB-S2 Receiver Module with DVB-ASI Output

Model: DTM-3237

Compact OEM module for receiving DVB-S2 or DVB-S and outputting it as DVB-ASI
All DVB-S2 modulation types can be demodulated: QPSK, 8PSK, 16/32APSK
Supports advanced DVB-S2 features including VCM, ACM, Multiple Input Streams (MIS) and Generic Stream (GS)
Reception and forwarding of transport streams or baseband frames (BBFRAMEs)
Full LNB support with DiSEqC interface and 13V/14V/18V/19V 500mA supply

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The DTM-3237 is a compact OEM module for receiving DVB-S2 or DVB-S and outputting it as DVB-ASI. The DTM-3237 can supply LNB power and has support for sending and receiving DiSEqC messages. The transponder details and the output format can be configured programmatically through several control interfaces.

Compact OEM module for receiving DVB-S2 or DVB-S and outputting it as DVB-ASI
All DVB-S2 modulation types can be demodulated: QPSK, 8PSK, 16/32APSK
Supports advanced DVB-S2 features including VCM, ACM, Multiple Input Streams (MIS) and Generic Stream (GS)
Reception and forwarding of transport streams or baseband frames (BBFRAMEs)
Full LNB support with DiSEqC interface and 13V/14V/18V/19V 500mA supply
Signal quality indicators include lock status, RF level, modulation type, code rate, MER
Serial control of the OEM module through USB, I2C or LVTTL serial control port
Persistent storage of configuration parameters
Converts DVB-S2 to DVB-ASI
Compact OEM module with USB control
Supports 32APSK, MIS, GS, VCM, ACM
APPLICATIONS
- Low-cost receiver module for satellite to cable transcoders
- Satellite data distribution
- Monitoring of satellite signal quality
- In combination with DTM-3200: DVB-S2 (or DVB-S) to TS-over-IP conversion

Receiver/Transmitter Format Type - USB
Spec Sheet available - Yes

Antenna Input: 75-ohm MCX Female
Input Return Loss: >9dB @ 1 to 2GHz
Tuning Range: 950 to 2150MHz
Input Sensitivity: -60 to -30dBm
Baud Rate: 2 to 45MBd
Modulation Standard: DVB-S2, DVB-S
Metrology:
- RF level: -60 to -30dBm ±5dB
- MER: 0 to 22dB ±2dB
- BER (DVB-S): Pre Viterbi; Pre RS
- BER (DVB-S2): Pre/Post LDPC & BCH
LNB supply: 13V/14V/18V/19V 500mA
DVB-ASI port:
- Physical layer: EN50083-9
- Connector: 75-ohm MCX Female

DTA-2107 - Multi-standard L-band Modulator

DTA-2137C - Dual-channel DVB-S2 Receiver Card for PCI Express Bus

DTE-3137 - Networked DVB-S2 Satellite Receiver

DTM-3200 - OEM TS-over-IP Converter with Standard Pin Headers

DTM-3237-DEVKIT - OEM DVB-S2 Receiver Module Development Kit

Receiver Module 191 kb - Data Sheet

Project List

Receiver Module 1824 kb - Other

Project List

Find a Dealer

Suggested Products

UCX Matrix Switcher Receiver with HDMI 2.0 inputs and USB 3.1 Gen1 host ports

by Lightware

2.0 HDBaseT POC Receiver IR, RS-232 (compatible w/ EVMX4X3 & EVMX8X6 & EVMX44PRO & EVMX88PRO)

by Vanco International

UCX Matrix Switcher Receiver

by Lightware