The standalone module can either be used as compact autonomous ASI to TSoIP gateway, or as remote I/O device for PC-based applications and time stamping for monitoring applications. Supports IP encapsulation and 2D FEC encoding according to SMPTE 2022-1/2 and LCD status display shows device identifier, bitrate, IP/MAC address and status.
Standalone module can either be used as compact autonomous ASI to TSoIP gateway, or as remote I/O device for PC-based applications
SMPTE-2022 and DTAPI mode
Time stamping for monitoring applications
Power-over-Ethernet support: No separate power feed required
Active loop-through with fail-over relays for input-to-output connection in case of power failure
Supports IP encapsulation and 2D FEC encoding according to SMPTE 2022-1/2
SNMP agent
LCD status display shows device identifier, bitrate, IP/MAC address and status
Uniform software access to DekTec TSoIP-, PCI- and USB devices through DTAPI
Install up to 12 modules in 3U 19” rack space using the DekTec rack-mountable rail, or units can be mounted on a DIN rail directly on a wall
Applications
Autonomous DVB-ASI to IP gateway
With DTE-3100: Tunnelling of ASI signals over LAN, WAN or the Internet
Remote DVB-ASI input adapter for server-based analysers, monitoring applications (Xpect), multiplexers and similar systems
Ethernet Adapter Type - Gigabit Ethernet PCI
Network Adapter Connector Type 1 - RJ-45
Network Adapter Connector Type 1 - Other
Network Adapter Connector Type 2 - RJ-45
Network Adapter Connector Type 2 - Other
Rackmountable - Yes
Spec Sheet available - Yes
Data Transfer Rate:
214 Mbps
Physical Layer:
DVB-ASI (Coax)
ASI connector:
75-Ohm BNC (2x) Input + Loop
Return Loss:
> 15dB
TSoIP Encapsulation:
UDP RTP (SMPTE 2022-2)
FEC:
SMPTE 2022-1
ASI to TSoIP Latency:
10ms
Buffer Size:
32MB
DTE-3100
- Network ASI Output Power over Ethernet Adapter