The VDA-VF analogue video distribution amplifier can be used to distribute any analogue source – whether HD or SD, reference or video. With its most popular application being for the distribution of SD Black and Burst or HD tri-level syncs reference, it can also be used to create multiple copies of composite and component video. The VDA-VF gives the most outputs yet on a Crystal Vision analogue video DA (up to 12), while you’ll get useful gain, equalisation and clamp adjustments, which are all controllable remotely. With up to 20 cards fitting in the Vision 3 frame, the VDA-VF saves you rack space and can be housed alongside any other cards from the Vision range.
- Analogue video distribution amplifier with remote control
- Use it to distribute SD Black and Burst or HD tri-level syncs analogue references, or SD or HD analogue video (composite and component)
- Provides multiple outputs of analogue source - maximum of 12 outputs with a loop-through of the differential input
- Suitable for long cable runs - correct distortion to the analogue signal with high quality equalisation for up to 300m cable length
- Gain adjustments of +/-3dB in 0.1dB steps
- Use the clamp to compensate for differences in ground voltage and remove hum on the signal
- Inputs and outputs accessed by using an appropriate rear module (either VR17 or VR18)
- Housed in Vision rack frames
- Space-saving - 96mm x 325mm card allows up to 20 VDA-VF in 3U (ten with VR17 rear module fitted)
- Flexible control and monitoring - frame integrated control panel, VisionPanel remote control panel, SNMP, ASCII and JSON protocols or the web browser-based VisionWeb Control
