This unique product provides a bridge between the ST 2022 and ST 2110 protocols, as well as allowing changes to network settings. It's the product to help you solve those IP challenges - whatever they might be! Plus it's future-proof – when this functionality is no longer required you can simply install a different on your MARBLE-V1 hardware.
Ideal for any applications where you need to make changes to network settings – such as network address translation, unicast to multicast address translation and the creation of media firewalls, as well as ST 2022 to ST 2110 protocol conversion
- Software app that runs on the MARBLE-V1 media processor
- De-encapsulates and re-encapsulates video (up to six HD/SD or three 3Gb/s) between up to four bi-directional 10GbE IP network interfaces
- Supports SMPTE ST 2110-10, 2110-20, 2110-21, 2110-30, 2110-31, 2110-40, 2110-50 essence-based protocols and SMPTE ST 2022-6 and 2022-7 protocols
- Ideal for applications such as network address translation, ST 2022 to ST 2110 protocol translation, unicast to multicast address translation and for setting firewall restrictions
- Supports 31 SDI video standards
- Full range of VLAN support
- PTP synchronisation, with support for master and secondary domain
- Supports all incoming and outgoing shaped flow types N, NL and Wide (SMPTE ST 2110-21 traffic shaping)
- Know your signal is present and valid, thanks to signal monitoring and fault detection
- IP flow monitoring including flow type, bit rate, packet loss, duplicated packets, physical layer errors and packet delay variation
- Inputs and outputs accessed by using an appropriate rear module (VR05)
- Housed in Vision rack frames
- Space-saving: MARBLE-V1 media processor is a ‘double slot’ 96mm x 325mm card, with up to ten MARBLE-V1 fitting in 3U
- Supports IS-04 and IS-05
- Flexible control and monitoring: frame integrated control panel, VisionPanel remote control panel, SNMP, ASCII and JSON protocols or the web browser-based VisionWeb Control
