Microphones : Ceiling Mounted Microphones : ClearOne - MEC3-XW Ceiling Mic Array (White color, XLR connector)

White Ceiling Microphone Array kit for Interact AT

Series:

Model: MEC3-XW Ceiling Mic Array (White color, XLR connector)

Part #: 910-001-014-W

Full 360-degree coverage
Three unidirectional elements reduce reverbration and noise
Design minimizes noise pickup fron ceiling sources
Optimized to work with ClearOne mixers, CONVERGE Pro, INTERACT Pro, INTERACT Pro 8i, INTERACT AT
Multiple ceiling microphone arrays can be connected to any mixer for covering a large room space

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

White ceiling microphone array kit for INTERACT AT includes RJ45 receptacle to XLR-M mixer adapter. Microphone array enhances any conferencing application which demands high-quality audio. Easily installed and affordable, ceiling microphone array delivers unbeatable conferencing sound with most unobtrusive microphone placement option. Three, wide-range microphones are mounted together into single unit array, providing rich sound of three individual unidirectional microphones while maintaining full 360 degree coverage.

Full 360-degree coverage
Three unidirectional elements reduce reverbration and noise
Design minimizes noise pickup fron ceiling sources
Optimized to work with ClearOne mixers, CONVERGE Pro, INTERACT Pro, INTERACT Pro 8i, INTERACT AT
Multiple ceiling microphone arrays can be connected to any mixer for covering a large room space
Standard CAT5 Ethernet cable runs back to the mxer
Designed for quick installation into drop ceiling tiles
Includes 12 and 24-inch drop down cables for varying ceiling heights
Sleek unobtrusive design
Frees table area while maintaining speech quality and intelligibility
Number of ceiling microphone arrays depends on the maximum number of microphone inputs supported by the mixer

Spec Sheet available - Yes

Polar Pattern: Cardioid
Dynamic Range: 80 dB (1 kHz at maximum SPL)
Signal/Noise Ratio: 60 dBA (1kHz at 1Pa)
Frequency Response: 100 Hz to 12kHz
Sensitivity: 114 mV/Pa
Element: Fixed-charge back plate permanently polarized condenser
Phantom power requirement: 12 to 52 vdc, 2 mA typical
Impedance: 200 ohms
Maximum cable length from array to mixer: 300 ft
Diameter: 1.50 in
Operating Temperature: -20 to 70 º C
Height: 3.30 in
Product Weight: 2.20 lbs

Ceiling Microphone Array Kit 528 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

Ceiling Microphone

by Biamp

AVB Ceiling Pendant Microphone

by Biamp

Pendant Microphone and PoE+ amplifier

by Biamp