Audio Production Equipment : Amplifiers (Audio) : ClearOne - CONVERGE PA 4120

4-channel 120W High-efficiency Power Audio Amplifier

Model: CONVERGE PA 4120

Part #: 910-3200-402

8W speaker output
70V/100V constant voltage output
Amplifer Technology
Class-D power amplifier
Switching power technology digital power amplifier

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The CONVERGE PA 460 amplifier is a 4 Channel x 120 Watts, high-efficiency power audio amplifier for reliable amplification with professional sound quality for conferencing, sound reinforcement, and distribution applications.

The CONVERGE PA 4120 amplifier is optimized to work with ClearOne’s DSP mixers, and it also works with any third-party mixers.

8W speaker output
70V/100V constant voltage output
Amplifer Technology
Class-D power amplifier
Switching power technology digital power amplifier
Advanced control
Input gain control per channel
High pass filter per channel
Protection from short-circuit, high temperature,
Standby mode when input signal not present
Per-channel indicators
Standby/protection
Built-in AC power supply
Back-up DC power option
Auto-standby for efficient power consumption
Software-free configuration
Plug-and-play installation
Manual switches for settings
Applications:
Boardrooms
Conference rooms
Training rooms
Lecture halls
Courtrooms
Auditoriums
Telemedicine facilities

Amplifier Type - Power Amplifier
Rackmountable - Yes
Spec Sheet available - Yes

Crosstalk: >60dB, 1KHz, maximum output
Depth: 16.54 in
Height: 1.73 in
Input Impedance: 10K-ohm
Line Inputs: 4 Channel, Balanced audio input, Euroblock connectors, 0.775V, 0dBu
Width: 18.98 in
Speaker Outputs: 4 Channel, balanced audio output, Euroblock connectors
Power Handling: 120 Watt
DC Voltage: 24 Volts
Mount Type: Rackmount
Product Weight: 14.33 lbs
Active Power: 300 Watt
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Maximum Frequency Response (Bandwidth): 20 kHz
Signal to Noise Ratio: 80 dB
Number of Channels: 4
Number of Inputs: 4
Number of Outputs: 4
Total Harmonic Distortion + Noise (THD+N): 0.10 %
Rack Units (Height): 1
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Current Draw: 10 Amps
AC Voltage (Minimum): 100 Volts
AC Voltage (Maximum): 240 Volts
Amplifier Topology: Class-D
Front Panel LED Indicators:
•STANDBY/PROT:
•Standby mode or Protection status indicators
•Solid orange light indicates Standby mode
•Blinking orange light indicates Protection mode due to:
•Speaker line short circuit
•Amplifier overload
•Temperature exceeds 131°F (55°C)
•Clip status indicator
•Red light indicates clip status due to:
•Input is too high
•Output is too high
•Input signal indicator
•Green light indicates signal is present
•Output signal indicator
•Green light indicates signal is passing out
Output Modes: 8-ohm and 70V/100V
Settings:
•Input Gain Control:
•Taper switch for linear gain setting
•-30 to 0dB
•Per channel setting
•High Pass Filter:
•Two-position DIP switch
•Off position: 20Hz to 20kHz
•80 Hz position: 80Hz to 20 kHz
•Per channel setting
•Standby
•Two-position DIP switch
•Auto position: Standby mode enabled. If no input
•signal is received for around one minute, unit enters
•Standby mode; Auto-wake up when input signal is
•detected.
•Off position: Standby mode is disabled
•Per Channel Setting
•70V/100V Output Setting:
•Two-position selection switch
•Left position: 70V
•Right position: 100V
•For all channels

CONVERGE PA 460 - 4-channel 60W High-efficiency Power Audio Amplifier

CONVERGE PA 460 (Qty 2) (1 Rack Mount Kit) - Bundle: Qty 2 CONVERGE PA 460 Amplifier units with Qty 1 Rack Mounting Kit

CONVERGE PA 460 Bundle (1 Rack Mount Kit) - Bundle: Qty 1 CONVERGE PA 460 Amplifier unit with Qty 1 Rack Mounting Kit

Amplifier 598598 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

Single Channel 100W 70/100V Amplifier with Mic Input

by Vanco International

30W, 2 Channel, In-Wall Addressable Bluetooth Amplifier

by Vanco International

8-Channel Power Amplifier, 150W/Ch., 4/8 Ohm or 100V, International, 220-240V

by Crestron Electronics, Inc.