24-bit analog-to-digital and digital-to-analog converters: 105dB SNR and 0.0015% THD+N
-10 to +24dBu software controlled output and input level
Interchangeable module connectors with choice of terminal block, StudioHub+TM RJ-45 or 50pin Centronics connector (compatible with AudioScience sound cards)
Analog I/O module intended for use in ASI2416 modular CobraNetTM interface. Contains eight inputs and outputs that operate at 48kHz sample rate. Up to four ASI1431 modules may be used in one ASI2416. AudioScience’s CobraNet implementation, based on CobraNet chip used, allows for up to 16 inputs and outputs, out of possible 32, to be used at any given time. Unique feature of ASI431 is its interchangeable I/O connector. Choice of 50-pin Centronics (ASI1491), StudioHub+TM (ASI1492) or terminal block (ASI1493) allows module to adapt to wide variety of interconnection schemes with minimal custom wiring.
Eight inputs and outputs
24-bit analog-to-digital and digital-to-analog converters: 105dB SNR and 0.0015% THD+N
-10 to +24dBu software controlled output and input level
Interchangeable module connectors with choice of terminal block, StudioHub+TM RJ-45 or 50pin Centronics connector (compatible with AudioScience sound cards)
Up to four modules can be used in one ASI2416
Spec Sheet available - Yes
Operating Temperature (Maximum):
158 F
Operating Temperature (Minimum):
32 F
Product Weight:
0.50 lbs
Type:
Balanced
Input Level:
-10 to +24dBu in 1dBu steps
Input Impedance:
10,000 ohm
A/D Converter:
24 bits
Output Level:
-10 to +24dBu in 1dBu steps
D/A Converter:
24 bits over sampling
Load Impedance:
600 ohm
S/N Ratio:
>105 dB
Sample Rates:
48/64/88.2/96/192 kHz
Frequency Response:
20Hz to 20kHz +0.1/-0.30dB
Dimensions (without module connector):
5.5 x 3.25 x 0.6 inch