2Ch to 1Ch Summing Amplifier, +24dBm Output - XLR I/O

Model: SUM100

Font panel, screwdriver gain controls
Loop-through DC connectors allow operation of multiple units from one power supply
Model SUM100 provides rugged XLR type input and output connectors standard
Model SUM100-RCA adds RCA connectors
Up to three NANOAMPS will mount side-by-side in one 19-inch rack space

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The SUM100 Summing Amplifier is an inexpensive, high performance amplifier that is designed as a line level stereo-to-mono summing amplifier. It is also useful as a gain block, and as an impedance converter and summing amplifier for IHF (RCA type) signals. The inputs provide balanced 40Kohm bridging impedance for line levels up to +24dBm. The high input impedance allows the SUM100 inputs to also bridge -10dBu (hi-fi, RCA plug) lines without loading.

Font panel, screwdriver gain controls
Loop-through DC connectors allow operation of multiple units from one power supply
Model SUM100 provides rugged XLR type input and output connectors standard
Model SUM100-RCA adds RCA connectors
Up to three NANOAMPS will mount side-by-side in one 19-inch rack space
Supplied as table-top mounting; other mounting options available

Amplifier Signal Type - Audio
Amplifier Type - Other
Warranty - Yes

Gain: 28 dB (Maximum)
NOMINAL LEVELS: +4dBu in, +24dBm Out to 600 ohm balanced load
PEAK LEVELS: +22dBu in, +24dBm out to 600 ohm balanced load
NOISE 20kHz B.W.: -90dBm maximum output
Harmonic Distortion: 20Hz to 20kHz: .02% Max. at Peak Level; .005% max at Nominal Level
Frequency Response: ± 0.25dB, 20 to 20,000Hz
Crosstalk: 70dB Minimum at 10kHz
Input Impedance: Balanced, 40k Ohm bridging
Output Impedance: Balanced, 40 Ohms Maximum
Power: 24V DC at 0.07A, connector sleeve is positive
DC Voltage: 24 Volts
Depth: 5.75 in
Height: 1.50 in
Width: 5.50 in
Warranty (Length/Type): 1 Year Limited
Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Total Harmonic Distortion + Noise (THD+N): 0.03 %
Product Weight: 1.54 lbs
Shipping Weight: 2.43 lbs
Number of Channels: 2
Number of Inputs: 2
Number of Outputs: 1

Amplifier 136 kb - Brochure

Project List

Request Quote

Find a Dealer

Suggested Products

8-Channel Power Amplifier, 150W/Ch., 4/8 Ohm or 70V, North America and Japan, 100-120V

by Crestron Electronics, Inc.

Single Channel 40W 70/100V Amplifier with Mic Input

by Vanco International

In Wall Wifi Streaming Amplifier 2x30W

by Vanco International