The TP315-102 HDMI over AnyWire receiver allows the transmission of 1080P HDMI signals up to 300 m using a simple 2-conductor cable. A single receiver is capable of driving up to 4 receivers using either 4 individual wire pairs over 300m each, or by daisy chaining the receivers. The only restriction being the wire pair from the receiver to each receiver cannot be bundled together, as crosstalk will occur. The TP315-102 is an economical solution for many audiovisual installations. The 2-wire solution makes installation easy without the need to cut and splice wires and install expensive connectors or purchase costly cables. Simply route your wires, cut and trim the installation, and connect to the terminals.<br>The unique design of the AnyWire Receiver provides stable video transmission over greater distances than other designs. IR pass-through for receiver side to receiver side control is provided without corrupting the HDMI signal during transmission of IR signals. Operation does not require any user control or interaction. Simply connect the HDMI input and the receiver scans for the receiver and, when detected, automatically pairs to the receiver and begins video transmission. A local video output is provided to support a local monitor. The local monitor allows the user on the receiver side to know what is being presented on the far side of the installation.